ORANGE COUNTY RADIO AMATEURS

Monthly Membership Meeting – March 8, 2021 – 7:30 pm

Platforms Utilized: OCRA UHF Repeater and Zoom.

MINUTES

MEMBER CHECK-IN – W4SAR (David) and KR4UB (Dan):

OCRA UHF REPEATER: W4SAR (David), KU4GC (Dee), W4ORD (Lad), KA1HPM (Nick), W1AEN (Ed), KO4GJO (Boyd), KK4RRT (Michael), KO4DHJ (Ken), KM4MBG (Jack), KR4UB (Dan), KA5ETS (Doug), KD4YJZ (Karen), KO4JAW (Mark), KO4ICM (Doug), KI4RAN (Bill), W4APM (Alan), N1LN (Bruce); N7RYN (Ryan), K2RRT (Mark), WB4OSU (Sherry), N1YXU (Laurie), KM4IWI (Bill) and N2XZF (Paul).

ZOOM: N8BR (Bill), NA4VY (Dave), and KR4UB, Dan),

OFFICER’S REPORTS:

President – W4SAR (David): Introduction and General Remarks

Vice president – W4ORD-(Lad): We are still in limbo with respect to arrangements for a holiday party. The final decision to have a party depends on the situation with Covid 19.

Treasurer – KR4UB (Dan): Current Club Membership stands at 96 current active paid-up members and 30 requiring renewal. 32 new members have been added during the past 12 months with 16 of those being newly licensed.

Secretary – N8BR (Bill): No formal report. But, in response to David’s request I will briefly review the Club’s proposal for processing club minutes.

1. Executive Board Meeting Minutes – The club secretary will prepare draft minutes of executive board meetings and distribute them electronically to board members for review and approval within seven (7) days of the board meeting.  Board Members will be permitted seven (7) days to review those draft minutes, articulate recommended revisions to the secretary, and for him/her to post the revised minutes on the club website for the general membership.
2. General Membership Meeting Minutes – The club secretary will prepare draft minutes of general membership meetings and distribute them electronically to board members for review and approval within seven (7) days of the general membership meeting.  Board Members will be permitted seven (7) days to review those draft minutes, articulate recommended revisions to the secretary, and for him/her to post the revised minutes on the club website for the general membership. Approval or disapproval of the minutes will be voted upon by general membership present at the following general meeting. Proposals #1 & #2 above were discussed at length by the executive board, revised pursuant to their recommendations, and adopted unanimously by their vote.

KR4UB (Dan): The report this evening is focused on our club’s development of a comprehensive code of conduct for amateur operators using our repeaters. For many years we have been blessed with repeater users who follow accepted protocol and practice common sense guidelines on the repeater. But unfortunately, in 2020 we have witnessed a disturbing increase in the number of transmissions violating FCC regulations. A number of these events required that our repeater be temporarily shut down as required by the FCC for a period of time. The OCRA Board of Director’s response has been to develop a set of guidelines which succinctly articulates the standards of behavior we expect our users to adhere to. Our executive committee along with representatives from the DFMA have worked hard to draft a document that accomplishes that goal, It has now gone through a number of iterations the most recent of which is posted on our club’s website. We are currently seeking input on that document from our membership, and plan to vote acceptance of the final version as policy before the next general meeting.

W4SAR (David): We are making progress with the development of revised job descriptions for our officers and board members at large. The document has gone through several iterations and will be adopted by the board shortly.

N1LN (Bruce): This report is relevant to the development of a club based equipment Loan Program. It is a new initiative for the Orange County Amateur Radio Club, having been launched in January, 2021. Its goal is to help club members who are new to the hobby borrow a piece of club-owned-equipment for a period of up to one year in order to get a new station up and running, or to replace failed gear in an existing setup. Our goal is to compile a list of club-owned equipment that is available to loan and give that information to club members. Club members familiar with loaned items will be available to help with their installation and use. Noteworthy is the fact that one Kenwood transceiver has been loaned to a club member via this initiative,

Action Item: Bruce will be finalizing the document and putting it on Google Docs. Also, Bruce will start to build a list of loanable equipment by sending an email to all club members requesting info about potential items they would like to add to the list. Some of the equipment could be OCRA owned and some owned or donated by members to the club.

W4SAR (David): A number of folks have applied to the club for license exams. Currently we are not using the B’Hai center for meeting purposes. When the CDC comes through with new guidelines and the parish is happy with the safety of its facility we will go back to holding face-to-face meetings there once again. Lad (W4ORD): commented on a recent covid 19 report that up-dated the proposed interval thought to exist between vaccination time and the development of immunity. A discussion about field day arrangements ensued. It was recalled that some weeks ago the ARRL renewed the modifications in traditional field day rules that applied last year regarding home based (D and E classified) stations. The current plan is to go with last year’s plan until further discussion yields a change in club perspective.

Club Roll Call check-out for the repeater took place at 8:10 pm. WLB/s

Platforms Utilized: OCRA UHF Repeater and Zoom.

Meeting Minutes

MEETING CONVENED AT 7:30 PM.

PRESIDENT’S REPORT – W4SAR (David): Introduction and General Remarks- Good evening all. As has been the case for most of this past year, we are convening tonight’s meeting using both Zoom and UHF repeater platforms rather that our regular in person format. This is being done to conform with statewide requirements for social distancing to deter the spread of Covid 19. Hopefully, with the upcoming availability of the new anti-virus vaccines, this requirement will soon be relaxed and we will be able to have our monthly gatherings at the B’hai center in Efland. As we embark on tonight’s meeting please keep in mind that irrespective of which platform you use, please check into the net using phonetics so that your call may be accurately included on the meeting roster. Also, please be aware that video and audio generated at this meeting is being recorded so that information presented can be accurately included in meeting minutes.

On a different note and as many of you might already be aware, my mother passed away some weeks ago, and I would like to thank those of you who sent well-wishes to my family and me. You will be pleased to know that my father is doing well.

MEMBER CHECK-IN – by  W4SAR (David) Net Control and KR4UB (Dan) Zoom Host Control:

OCRA UHF REPEATER: W4SAR (David), KU4GC (Dee), W4ORD (Ladd), KA1HPM (Nick), KM4MBG (Jack), KF4PAB (Lenore), KZ1X (Steve), KO4DHJ (Ken), KR4UB (Dan), W4BOH (Wilson), KN4BTI (Mark), KA5ETS (Doug), N4JQR (JR), WB1AJJ (Jonathan), KI4MXP (Gerald), KM4WXW (Jeffrey), KD4YJZ (Karen), KR4UB (Dan), KR3AM (Mark), KO4JAW (Mark), KO4ICM (Doug), KI4RAN (Bill), WA4AHR (Dewey), KN4EOO (Richard), and W3AHL (Steve).

ZOOM: N8BR (Bill), NA4VY (Dave), KN4QBZ (Fred), and KR4UB, Dan),

TREASURER’S REPORT: KR4UB (Dan): Current Club Membership stands at 118 (89 current active paid up members, 29 requiring renewal). 24 new members have been added during the past 12 months.

REPEATER REPORTS: KR4UB (Dan): All of the OCRA repeaters are now working and on the air for the first time in 5 years. The 145.230 machine has been moved to a temporary location in Pittsboro.

The OCRA savings and checking account has a good reserve amount available for expenses, as it needs to have for costs we will face in the future.

• Another repeater needs to be built, a replacement machine on standby and ready to go into service for when the 442.150 repeater high up on the tower eventually fails. The current repeater was installed in February, 2016 and hopefully has another 4 – 5 years or so life left before it eventually fails. While only high reliability components are used to build the OCRA repeaters, the exposure to extreme beyond mil-spec temperatures in the sealed cabinets on the tower eventually takes it toll. 
• With tower crews now required to replace the machine, a completely self contained ready to go replacement repeater must be available to minimize the tower crew trips and time up on the tower to contain the escalating tower crew costs.
• A spare Kenwood TKR-850 repeater deck and duplexer are already on hand. Additional parts to complete the spare repeater include another power supply, SCOM 7330 controller, and an additional pass band cavity. The power supply and SCOM controller will cost around $1100 – $1200.  Hopefully a good used pass band cavity filter can be located and purchased.
• In addition, we have to keep in mind that the 442.150 repeater antenna is the original antenna installed approximately 25 years ago and when it has to be replaced, tower crew and antenna cost could easily be in the $4-5K neighborhood.

KA1HPM (Nick): We installed the 145.230 machine in Pittsboro last Wednesday at a site on Fire Tower Road. The antenna is up at about 130 feet. It is a good installation and many folks are using it. We are also planning for at least two additional towers in Chatham County.

FUTURE AGENDA ITEMS: W4SAR (David):

1. Field Day: The scores for the 2020 ARRL Field Day are now posted in QST and on the ARRL website. OCRA did very well and placed 9^th among clubs submitting aggregate scores. Noteworthy is the fact that our primary regular competitor, a station in California, placed 32^nd. Club certificates for member participation will be prepared and handed out at a future meeting.
2. Elections: Club elections will be held at the next meeting in January. Positions that will be available include that of President, Vice President, Treasurer, Secretary, and Board Member. Individuals currently occupying those positions have indicated that they are willing to continue. Specifically, our current president, David (W4SAR) indicated that he would be willing to continue in that post but will step down after another term. Ladd, W4ORD, is willing to continue as vice president, Bill (N8BR) is willing to continue as secretary. Dan (KR4UB) is willing to continue as treasurer but will step down from the repeater responsibilities he has also carried for over 20 years. He will continue to manage the club website, provide technical support to those taking responsibility for the club’s repeaters and work on club recruitment. Finally, Karen (KD4YJZ) is willing to continue as board member. Prior to our next membership meeting I will prepare ballots and circulate instructions for the election.
3. Code of Conduct for Club Repeaters: Most repeater sponsoring clubs have developed documents that define organizational expectations for appropriate conduct during use of its repeater(s). OCRA should be no exception. Therefore, your OCRA board will be discussing the issue with the desired outcome of producing a draft document for club discussion, revision and potential adoption. Note: Input from KM4MBG (Jack) indicated that these discussions are also going on in DFMA (Durham FM Association), and focused on a code of conduct that covers all club activities rather than just those pertaining to the use of repeaters.
4. Future Meetings: There will be a meeting of the OCRA Executive Board next Monday at 7:30 PM.

ADJOURNMENT: Meeting Adjourned at 8:45p.m.

WLB/DE/s

ORANGE COUNTY RADIO AMATEURS
Monthly Membership Meeting – November 9, 2020 – 7:30 pm
Platforms Utilized: OCRA UHF Repeater and Zoom

Minutes

MEETING CONVENED AT 7:30 PM
N1LN (Bruce): Introduction and General Remarks- Good evening all. I am again serving as host this evening in place of W4SAR, David, our club president who is still occupied with family issues. While he may check in this evening, we can expect him to be back with us regularly again by the December meeting. Additionally, please keep in mind the following points:

• The majority of the membership present at this meeting are participating through the OCRA UHF repeater which may time-out occasionally.
• This is not an ARES net so I will be using my own call sign.
• Some of our members do not have VHF/UHF equipment and will be joining us via Zoom.
• Irrespective of which platform you use, please check into the net using phonetics so that your call may be accurately included on the meeting roster.

KR4UB (Dan) has posted and mailed out the agenda for tonight’s meeting. It includes (1) a formal check-in, (2) general remarks, (3) reports from our treasurer, repeater gurus, our holiday party chairperson and (4) A round-table during which all members will have an opportunity to report on their ongoing and new radio-related activities since our last meeting. During this part of the meeting all attendees are strongly encouraged to present their ideas for future club presentations and projects.

Finally, please be aware that video and audio generated at this meeting is being recorded so that information presented can be accurately included in meeting minutes.

MEMBER CHECK-IN:

• OCRA VHF/UHF REPEATER: N1LN (Bruce),KU4GC (Dee), W4ORD (Lad), KA1HPM (Nick), KM4MBG (Jack), KF4PAB (Lenore), KZ1X (Steve), N2XZF (Paul), KN4ZHP (Mike), KO4DHJ (Ken), KR4UB (Dan), W4BOH (Wilson), KX4P (John), KN4BTI (Mark), KA5ETS (Doug), N4JQR (JR) KM4JZA (Mike), KN4JYP (Cathy), WB1AJJ (Jon), KI4RAN (Bill)
• VIA ZOOM: N8BR (Bill), NA4VY (Dave), KN4QBZ (Fred), and KR4UB (Dan)

TREASURER’S REPORT (Dan KR4UB): Current Club Membership stands at 114 (87 current active paid up members, 27 requiring renewal). 22 new members have been added during the past 12 months.

REPEATER REPORTS:
KR4UB (Dan), KA1HPM (Nick), N2XZF (Paul) and W4CFO (Jim): All participated in a repeater work day at Dan’s home.

KA1HPM (Nick): Presented the report for Chatham repeaters. Antennas will be going up soon. Installers are saying they will be placed at 100’ but the committee would like to see them higher so they will be more effective. The two meter repeater audio test went well, and the machine should be on the air by early December. The Auxcom net meetings have been taking place on alternate Tuesdays. Members are looking forward to taking part in in a WinLink event this coming Saturday. With that technology hams will be able to handle e-mail messages without use of the internet.

HOLIDAY PARTY UPDATE:
KR4UB (Dan): A note from David, our president, informs us that because of the Covid 19 pandemic and our inability to provide adequate protection for attendees at a dinner event, the club board members have decided that the Christmas party is cancelled for this year.

W4ORD (Lad): As chair of the Christmas Party Committee Ladd reaffirmed for the club membership that the facility folks and catering operation have already been notified that the party is cancelled.

MEMBERSHIP ROUNDTABLE:
N1LN (Bruce) Officially opened the membership roundtable. This part of the monthly meeting is especially important because it provides an open forum in which each member has an opportunity to talk about his or her own ham radio activities and how they contribute to the cohesiveness and mission of our wonderful hobby. We are further emphasizing that this part of the meeting provides a venue for members to make suggestions about potential subjects for future club projects and presentations.

KO4DHJ (Ken): Thanks to AB4OZ for spearheading the mini-hamfest last Saturday. It provided an opportunity for me to sell lots of surplus stuff which made my XYL very happy.

KN4BTI (Mark): I Have been in Richmond with some medical issues and minor surgery that required fairly extensive rehabilitation. We now have 16 “chatters” on the Carbon Link, a packet radio link headed up by K4KZ. If the club would like a presentation on this initiative please feel free to let me know and I will set it up.

KA5ETS (Doug): Has been monitoring the bands for DX conditions on FT8. There has been a noticeable paucity of stations from the middle east. He is also doing some antenna work in preparation for the winter. Sporadic E openings on 6 meters have been observed.

KA1HPM (Nick): Not much radio activity. Very busy with AuxCom and attendance at virtual breakfasts at Virlies in Pittsboro.

N4JQR (JR): Is enjoying Zoom communication within the club and doing lots of jobs around the house.

KM4JZA (Mike): Requests that club information be forwarded so he can become an official member. He is enjoying this net.

KM4MBG (Jack): Congratulations to Dan (KR4UB) for doing a great job on the OCRA website (ncocra.org). He has done a great handling of emails to the benefit of both the OCRA and DFMA clubs. He announced that DFMA is not yet sure that Durham Fest will take place this year because of Covid 19. Suggested that both clubs design “show and tell” presentations consisting of short videos that can be replayed at various times so members can view them on the web when it is convenient. Q and A sessions could logically follow. Jack would be happy to give a presentation about free linux software that has useful ham radio applications.

KN4JYP (Cathy): Signed on to tonight’s net using a handheld on her back deck. Says working entirely from home is a nightmare. The remodeling projects at her home are complete and she is now ready to challenge her Home Owners Association for antenna privileges.

W4ORD (Lad): Recent storms have taken down literally all of his antennas. He has had minor foot surgery and eye surgery recently and is recovering from both.

KF4PFB (Lenore): Not too much radio going on. Always looking forward to Jack’s cooking.

KX4P (John): Having fun playing with a new Kenwood VHF/UHF duo bander for 2M and 440 mhz. .Recent ham radio activity included participation in the Classic Exchange. He wasn’t able to contact N1LN but had a lot of fun anyway. Has been trying to replace the dial cord on his Collins 75A1 but is finding it to be a complicated and time-consuming job.

KZ1X (Steve): Looking forward to beginning his antenna/tower rebuilding project which is scheduled to begin one week from today. Wants to know if the repeater on 53.45 has come back yet. Dan replied for that the last several years, summer time propagation brings in a signal from some distant source that times the repeater out and takes it off the air. A google search indicates historically there have been some beacons on this frequency

NA4VY (Dave): Noted that he and his XYL spent some vacation time on the lake. The weather was great. Has been participating in numerous local nets. Would like to give a club presentation about the radio telescope he visited in Green Banks, WV.

N2XZF (Paul): Helped with repeater work at Dan’s and attended a virtual meeting at Mikes.

KU4GC (Dee): is spending some time in Wilmington working on settling his son’s estate.

KN4QBZ (Fred): Would be available to present a program on AuxCom for the club.

WB1AJJ (Jon) Agrees that having club members present programs on how they developed their interest in ham radio and actually got into the hobby would be useful and entertaining. He also feels that this approach would be more appealing if the presentations were organized by decades during which members’ interests in the hobby bloomed.

N8BR (Bill): has just acquired a new Kenwood duo-band VHF/UHF mobile transceiver and is building a low-visability tilt-over mast for the duo-band vertical antenna that he has assembled to use with it. He hopes that this choice of toys will allow him to join our virtual club meetings via the repeater in a manner that pleases the home owners association where he lives.

KR4UB (Dan): hosted a repeater building session with Paul N2XZF, Nick KA1HPM and Jim W4CFO. He also worked on the board agenda and began writing software to make setting up the Net/Zoom meetings. Per Mike, KM4JZA’s request, Dan will add him to the club email distribution list.

W4BOH (Wilson): Prepared a beautiful new operating position for his radios. He also made 44 contacts in the Classic Exchange Contest that took place last week end. Refurbishment of the ’34 Chevy truck is coming along well as is repair of the steering box in his Ford tractor.

KI4RAN (Bill): requested to be added to the OCRA Zoom list.  Dan, KR4UB replied to Bill that he is already on the OCRA Meeting email distribution list (which includes the Zoom information) and that his email SPAM settings should be checked.

MEETING ADJOURNED AT 8:45 pm
WLB/DE/s

OCRA Secretary: Bill, N8BR

ORANGE COUNTY RADIO AMATEURS

Monthly Membership Meeting – October 12. 2020 – 7:30 pm

Platforms Utilized: OCRA UHF Repeater and Zoom.

MEETING CONVENED at 7:30 (N1LN):

OPENING REMARKS (N1LN): Good evening all. I am serving as host this evening in place of W4SAR, David, our club president who is presently unavailable. Before we begin, I want to review the following “house-keeping” items:

1. The majority of the membership present at this meeting are participating through the OCRA UHF repeater. However, some of our members do not have UHF equipment and are joining us via Zoom. I want to emphasize that the primary mode of participation in our meetings is via the club’s UHF repeater and all members are urged to use that platform if possible.
2. Members should not use repeater or zoom time to test station function. That task should be performed before signing on to the net.
3. For those of you coming aboard with zoom please keep in mind that it is linked to transmit/receive functions of the repeater and, as such, must comply with FCC requirements for station identification and general operation.
4. The attendance at most of our club meetings is sufficiently large that it is important to keep individual input as brief as possible during the open round-tables so meeting time can be most efficiently utilized.
5.  All net input and video are being recorded so that information presented can be accurately included in meeting minutes.

MEMBER CHECK-IN (N1LN and KR4UB):

OCRA UHF REPEATER: KU4GC (Dee), WB1AJJ (Jonathon), W4CFO (Jim), KN4EOO (Richard), W4ORD (Ladd), KA1HPM (Nick), KM4MBG (Jack), KF4PAB (Lenore), K2RRT (Mark), KZ1X (Steve), N2XZF (Paul), KN4ZHP (Mike), KO4DHJ (Ken), KR4UB (Dan), and W4BOH (Wilson).

ZOOM: N8BR (Bill), NA4VY (Dave), KN4VXB (Aurora), W4SAR (David), KD4YJZ, (Karen), KN4QBZ (Fred), and KR4UB, (Dan).

TREASURER’S REPORT (Dan KR4UB): Current Club Membership stands at 115 (85 current active paid up members, 28 requiring renewal, 2 expiring, and 4 pending applications awaiting completion (dues). Twenty-six new members have been added during the past 12 months.

REPEATER REPORTS:

Northern Section (Dan, KR4UB): We have been hosting repairs for the 145.230 machine preparing it to go back on the air. Southern Section (Nick, KA1HPM): We have been working on our repeater and it should be up and running by the end of the month. Chatham EOC is getting building permits and firming up orders for new towers. Construction should begin in December and be completed by the end of January.

Presentation

KN4VXB (Aurora): The presentation tonight is about the recently founded OCRA Ham Pi group, a collection of hams who are interested in microcomputers such as raspberry Pi and Arduino as well as other single board computers and their possible applications in amateur radio. To date this group is comprised of 8-12 folks who have met together twice during the past couple of months. About half of the group is made up of new hams and the other half are more experienced folks. The projects they’re working on include a PTT switch for Zoom meetings, a QCX CW SDR transceiver with an antenna system and various power converters. If you are interested in joining this group please email Aurora.

MEMBERSHIP ROUNDTABLE:

KU4GC (Dee): Not much ham activity this time around. We are still disposing of lots of things from our clean-up and reorganization efforts. Many items have been contributed to the Scrap Exchange.

WB1AJJ (Jon): Not much new here. Work is chaotic and has been taking much of my time. I did manage to get the ICOM 6-meter rig repaired. I suggest more “show and tell” presentations for our meetings, but they are tough to arrange with Covid 19.

W4CFO (Jim): Has been working on a number of repeater projects with Dan and Nick.

KN4EOO (Richard): Has been working on his tractor. It dropped a rear wheel and had to be repaired. A lot of antifreeze was spilled in the process. He is in the process of testing the tractor. In addition he is also taking radio classes (EC16 and BR 101).

KA1HPM (Nick): Managed to get together with his extended family on the beach at Emerald Isle. He set up his HF rig with a Ham Stick antenna for 80 meters on the third floor balcony of their house. Using that gear he was able to access the Sunday night net that originates in Birmingham, Alabama. Additionally, he announced to us that The American Red Cross will be hosting an emergency drill in November which he will attend along with ~250 other participants.

KM4MBG (Jack): In his comments Jack stresses the fact that with the pandemic he is not doing a lot with ham radio, and places emphasis on the projects he wishes he was working on rather than telling us what projects he is actually doing. Among the things he mentioned was the fact that the pandemic is allowing him to spend more time at home and that has provided him with opportunities to do more cooking and more work with the nets. Noteworthy among his homebrew cuisines was a pasta dish with eggplant sauce which he and Lenore considered to be quite good. On the ham front he reports that he has received a shipment of parts for a field programmable gate array that he will be assembling shortly. Jack would like to have presentations on the new modes that are available for hams..

KF4PFB (Lenore): Among her comments Lenore reports that in the recent past she had not been very much involved with ham radio. On the other hand, she has spent more time working at home and taking cooking classes.

K2RRT (Mark): Mark is a new ham and is looking for a good antenna system for his rig. He has also obtained the parts to build a “shari” which is an all star link to put on the Pi 4. In addition, Mark is interested in linked repeaters and would like to talk to any club members who share that interest and understand how these systems work.

KZ1X (Steve): Steve is in the process of rebuilding his ham shack. This will be a major task that involves tearing down walls and performing a complete over haul of his space. In addition, he is planning a major addition to his tower including several new antennas.

N2XZF (Paul): Built a 10 meter J Pole antenna which worked very well. He also helped Dan KR4UB sort out the various signal ground pins on the Kenwood repeater external connector interface which as it turns out, all go to a common internal grount point (LOL!)

NA4VY (Dave): It is time to get up additional wire antennas, especially for 80 meters. Was out of town in Michigan last week and flew in a hot air balloon, While cleaning his basement found found a ten meter transceiver and antenna that he is willing to give to anyone needing HF gear. Suggested topic for presentations: Let the senior members of the club recall how they got involved in ham radio.

KN4ZHP (Mike): Has had success using Win-Link which would help with Red Cross exercises.

KO4DHJ (Ken): Checked into many nets. Is planning to move stuff from his shop and rebuild the shed.

KN4VXB (Aurora): 1. Has been active in the Ham Pi Group, 2. Learning to solder cables, 3. making a prototype Fox transmitter, 4. Learning ways to use Raspberry Pi to control cameras that are used in her graduate research, and 5. Learning to wind toroids.

W4SAR (David): Celebrated his 40^th anniversary. Is preparing certificates for Field Day participants. Announced that holiday party plans coming soon. Thanked Bruce for being master of ceremonies for this meeting.

KB4YJZ (Karen): Eating lots of delicious seafood during her anniversary celebration with David.

KN4QBZ (Fred): 1. We’ve had our 50^th anniversary and my wife again reminded me that there is no guarantee about what the future will bring so we gotta keep things going!! 2. Folks who are familiar with Winlink are a real asset for the Red Cross emergency exercise and their help would be most appreciated. A discussion of this process would be a good topic for another club program! 3. With regard to “Richard’s comments above about the tire leaking antifreeze solution—the solution for any pollution is dilution—that stuff is CaCl and it is toxic for grass. Dilution and flushing with water is the best way to take care of it!

N1LN (Bruce): As most club members are aware, over the past couple of years Bruce has been down sizing his contest antenna farm from a 4-tower monster with multiple monoband yagi’s to a smaller more manageable but almost equally powerful system using just two towers, each supporting a large multiband yagi. This has not only reduced the complexity of the overall antenna layout, but also the amount of both general maintenance and climbing required to keep the station in good repair. In addition, he has also reconfigured the indoor component of his station so it now houses one principal contest operating position instead of two. The equipment from the former second position has been replaced with a Heathkit DX-60 transmitter, HG-10 VFO and Hammarlund HQ129X receiver to be used for “pleasant memories from days of yore” type operating.

On a downside, the new antenna arrangement has caused some issues with Bruce’s management of the 10 meter OCRA net. Specifically, in the original system which utilized two or three 10 meter monoband yagis stacked together on a single tower it was possible for him to cover two or three different directions at the same time using a stack match. However, with the new set up in order to cover two different directions using multiband yagi antennas on separate towers requires switching rf from the antenna on one tower to another one pointed in a different direction on another tower, To make the process simpler and more efficient Bruce has built a switching/matching system that permits him to simultaneously drive the 10 meter functions of the two antennas pointed in different directions at the same time. The system has been put into operation and is now working as hoped.

KR4UB (Dan): Dan has ordered a Pi 4 and is looking forward to using it. He is also hosting the 145.230 repeater build. In addition, he and Mark KR3AM have been instrumental in the development and implementation of the hybrid repeater/Zoom platform OCRA has currently been using for its club membership to access virtual meetings during the COV 19 pandemic. Under most circumstance the preferred mechanism for accessing non face-to-face club meetings would be only via the repeaters. But, given the significant number of folks who do not have vhf and uhf equipment to access these machines the hybrid platform can be effectively used,

Dan has also been managing the implementation of the hybrid format. And, while it has been effective in bringing club members together during these difficult times, it has been eminently clear that its effectiveness depends on club members’ efforts to learn and practice the procedures necessary to successfully use it. To address that issue Dan is recommending that all potential users go to the club website and select any one of the following three buttons: (Members), (Meetings) or (Nets), and read the article “About OCRA Club Meetings, Nets and Zoom“. Questions about any of this information may be addressed to Dan

W4BOH (Wilson): Wilson is anxious to have show and tell back! He is willing to present a show and tell about his restoration of a 1934 Chevy truck.

W4ORD (Ladd): Lost several trees in the storm and while dropping one of them took out his antenna. He will need help pitting the antenna back up. The exchange club is still available for a Christmas party.

MEETING ADJOURNED AT 8:45 pm

WLB/DE/s