OCRA Club Meeting Monday, April 9th Presentation – The Lurid Details of a W4BOH antenna for Bouvet

When the Bouvet Island DXpedition was announced, some of W4BOH, Wilson’s DXer friends ganged up on him and urged him to put up a respectable antenna for 160m, since making a contact with Bouvet on 160 would be a real challenge. Or maybe they wanted company in the misery of not contacting Bouvet.

In any case, Wilson exercised his best management skills and recruited expert assistance from two of the DXer friends to help design and erect the antenna, which turned out to be a 57 foot top loaded vertical with four tuned radials. Always looking for a bargain, Wilson got W3AHL, Steve to adjust the EZNEC model to make the antenna potentially useful on other bands and in other configurations by changing the matching arrangement at the base.

Once the design was done, WA4PSC, Howie visited the Land of Magic and made two magnificent shots with his PBTBL (PneumoBallistic Tennis Ball Launcher) to get ropes over some of the highest trees at the OCRA/DFMA Field Day Site. At least the last two shots were magnificent. Steve then helped assemble some strong wire, of unknown parentage, into something resembling his design and helped pull it up into the ether. Of course his skill and analyzer were used to tune the radials to bring the antenna to resonance in the low end of 160m.

You’ll have to come to the OCRA Monday, April, 9th meeting to learn the lurid details of just what the beast (the antenna) looks like and what it can do on the air. Who knows, there might even be another story about getting a suitable amplifier assembled in time to contact (Or NOT) Bouvet some day.

Leave a Reply

Your email address will not be published. Required fields are marked *